Wheel Sand Washer

Processing capacity: 50-150t/h

Output size: 0-10mm

Applied material: 7.5KW-18.5KW

Email: vip@shihukj.com


Product Introduction:

XSD wheel sand washing machine is a kind of wheel and bucket artificial sand washing equipment which is used with sand making machine. It can wash stone powder and impurity in the sand made by sand making machine away. Advanced technology combining with the actual situation of domestic aggregate industry makes wheel sand washing machine outstanding. High washing ratio, reasonable design, large capacity, small motor power and little sand loss are its advantages. Especially the transmission part was isolated from the water, which can mostly reduce the failure rate compared with the traditional sand washing machine. So it is the best choice for domestic sand washing industry's updating.

Wheel Sand Washer

Features:

1. It is of simple structure. The bearing device of impeller drive is separated from water and materials with water, to avoid in a large degree that the bearings are damaged by being soaked with water, sand or some polluted things.

2. When it is used for cleaning sand in quarries, it has many advantages compared with the traditional spiral one.

3. There is little loss for medium-sized and fine sand and stone powder. The grade and the fineness of the sand for construction after being washed can be up to the national standards, such as "sand for construction" and "cobble and broken stones for construction".

4. There are no other wearing parts except the screen mesh.

5. It features long service life and few times for maintenance.

Operating Principle:

When running, motor through the triangle, reducer, gear reducer drive slowly rotating impeller after sand feed slot into the basin, under the drive of the impeller, and mutual grinding, remove cover impurity on the surface of the sand and gravel, and destruction of the coated sand moisture layer, favors the dehydration; Add water at the same time, form a strong current, to take away impurities and the proportion of small foreign body in time, and from the spillway trough eduction, complete the cleaning effect. Clean sand by the leaves away, and finally into the sand from rotating impeller discharge chute, complete sand cleaning effect.

Technical parameters of Wheel Sand Washer

Model Screw DIA
(mm)
Runner DIA
(mm)
Tube Length
(mm)
Selected Size
(mm)
Capacity
(t/h)
螺旋转速
(r/min)
Screw rotation Speed
(kw)
Water Consumption
(t/h)
Weight
(t)
Overall Diamension
L×W×H
(mm)
XSD2610   2600   ≤10 50   7.5   2.68 3320×2125×2670
XSD3016   3000   ≤10 80   15   3.26 3810×2686×3085
XSD3620   3600   ≤10 150   18.5   4.3 4500×3206×3485

Leave a Comment

Recommend