Spiral Sand Washer

Processing capacity: 100-350t/h

Output size: 0-10mm

Applied material: 11KW-15KW

Email: vip@shihukj.com

Product Introduction:

Spiral Sand Washing Machine is used to removing the dust in sand and grading sand for the metallurgic, construction material and hydropower industries. It is suitable for the washing work of the fine grain and coarse granularity material. Wash stone machine suitable for fine grain and coarse granularity material the washing work, especially suitable for washing the sand for building and sand for road. Spiral sand washing machine has the characteristics of rational construction, easy maintenance, big capacity, low power consumption and high washing cleanliness. The novel leakproof structure, fully enclosed oil bath type transmission device and adjustable overflow weir board guarantee the high performance of spiral sand washing machine.

Spiral Sand Washer


1. High capacity and high power scrubbing.

2. The long drum of the scrubber retains material for longer, more vigorous washing for complete separation.

3. One high output electrical motor driving a gear system providing efficient torque.

4. Adjustable rotary speed .

5. The water with high pressure flushed the inwall of drum.

6. Mechanical sealing of inlet chute-minimal spillage when over feeding.

7. Drive loads absorbed within the drive frame and pivoting drive frame design-Foundations only have to support vertical load and are not critical for alignment ie minimal cost.

Operating Principle:

Sand washing machine work, the motor through the V-belt, reducer, gear reducer driven impeller after the slow rotation, sand and gravel are washed into the tank to the trough, in the impeller, driven by rolling and grinding each other to remove cover the gravel surface of the impurities, while destroying the vapor-coated layer of sand to facilitate dehydration; The same time, add water to create a strong water flow, in a timely manner a small proportion of impurities and foreign matter away from the export of washing tank overflow discharge to complete the cleaning effect. Clean sand and gravel away from the blade end into the gravel from the rotation of the impeller out of Trough, the completion of gravel cleaning effect.

Technical parameters of Spiral Sand Washer

Model Screw DIA
Runner DIA
Tube Length
Selected Size
Screw rotation Speed
Water Consumption
Overall Diamension
LSX915 915   7585 ≤10 100 21 11 10-80 6.2 8500×2950×1930
2LSX915 915   7585 ≤10 200 21 2×11 20-160 11.5 8420×3765×2030
LSX1115 1115   9782 ≤10 175 17 15 20-150 10.9 10970×3945×4720
2LSX1115 1115   9782 ≤10 350 17 2×15 40-300 17.94 10970×5250×4720

Leave a Comment